FYI,
Here's the in development hypex DLCP "Digital Loudspeaker Correction Platform"
http://www.hypex.nl/index.php?option=com_content&view=article&id=81&Itemid=93
which has a 96kHz sampling rate and built in IR receiver. So maybe some competition for the miniDSP soon. Hopefully we...
I guess that really doesn't matter in this case since I wouldn't be using digital out. What they seem to be doing is mashing in S/PDIF and maybe the DCX2496 will accept it as AES3. You were putting the attenuators on the digital out of the DCX2496 right...
I think I understand now, I edited my post to be a little more clear hopefully. It's basically a multi-channel DAC (firewire mode only) for stereo fronts and subs so you can do software crossover? Otherwise you'd have to do crossover after a stereo DAC (requires two preamps) or crossover after...
I see, so the MR816 could be used as DAC / preamp right? How would you change the volume? Use Firewire or S/PDIF in and out the front headphone jack? I see that they support DSP but can it do crossover and not just PEQ? Or would the crossover / volume control happen in the software on the...
Hmm, I had no idea such a thing existed. Interesting option though it still leaves me with having to add a preamp at the end for volume control. So the chain would consist of four components. (S/PDIF out) -> [S/PDIF to AES3 converter] -> [DCX2496] -> [preamp (2x one for strereo one for sub?)]...
For reference, it would be the setup used on page 25, 6.4 Stereo operation plus mono subwoofer:
http://www.behringer.com/assets/DCX2496_P0036_M_EN.pdf
Though the problem with this unit is "3 analog inputs (one suitable as digital stereo AES/EBU input)". I need a S/PDIF TOSLINK or COAX in...
Upon further review it looks like the miniDSP with miniDIGI combo can do everything that I want. miniDIGI for S/PDIF TOSLINK / COAX in. miniDSP for crossover with computer based interface with high accuracy configuration and DIY adding of potentiometer for master volume control over all...
I think there may be some confusion here. I intended to say I wanted a crossover to separate between the sub signal and (low + mid + high as one) for the active monitors. I'm fine with the active monitors crossover not being configurable and let it do whatever it does for the drivers in it's...
I'm unfamiliar with the term "external active system". Could you explain?
MiniDSP - I would have to get the miniDSP / miniDIGI combo for digital in, but it doesn't have dynamic volume control on the audio out so I'd have to get a preamp. Questionable DAC quality and low resolution 48kHz...
Hello Jack,
Yeah, I know what you mean, but to allow the active monitors to mechanically roll off would not only mess with the mids but also overhype what lows it could output because both it and the sub would be outputting the overlapping lows (phase issues?). Even more important for the...
The way I thought of my system is that the PC would provide S/PDIF out and from there I could stay firmly within the audiophile / traditional audio industry realm and avoid USB / Firewire (audio industry / computer hybrid solutions). Maybe that's something I need to get over. For recording...
Loosing resolution on the S/PDIF out (multiply by .31 rounding loss also) before doing anything is too much loss as far as I'm concerned, especially if listening at low to moderate volumes.
I thought about that, but the problem is I want to use an external DAC (would require 2 of them) and I...
I don't fully understand the features they offer but I assume you're talking about things like the "DEQX HDP-Express" and the "Trinnov Doremi Pegase". While they seem like nice HT pre-pros they have the problem of overkill both in terms of features and price. I don't foresee going beyond 2.1...
After looking further into miniDSP I found this "Digital input crossover configuration" on http://www.minidsp.com/applications/stereo-2way-xover
Is it possible to set the volume of the outgoing optical signal on a PC? If it was, would there be any resolution issues of DSP after lowering the...
Hmm, I was afraid of that. It seems like such a waste of extra channels / power amp to use a HT pre-pro / receiver. I'd assume that most of those don't have highly configurable crossovers. I'd like my money to go into high quality components instead of all the features of a HT piece. :eek...