Taiko Audio SGM Extreme : the Crème de la Crème

heebrog

Well-Known Member
May 12, 2018
131
51
135
Perth, WA
Hi Emile.
Is the Taiko switch still on the cards?
 

Taiko Audio

Industry Expert
Feb 10, 2017
4,242
13,063
1,925
The Netherlands
taikoaudio.com
curious has anyone upgraded the extreme's iec power receptacle with this one? http://www.furutech.com/2016/09/01/13741/

That is more of a sideways move in the Extreme trading upper bass and midrange density for a more pronounced top end (which could be interpreted as sounding more “open”). It’s a good inlet, I like and do use them in front of isolation transformers for example. If you want some of that with the Extreme you could consider fitting a FI-50 NCF on your powercord which would be a less invasive procedure.
 

Blackmorec

Well-Known Member
Feb 1, 2019
748
1,273
213
That is more of a sideways move in the Extreme trading upper bass and midrange density for a more pronounced top end (which could be interpreted as sounding more “open”). It’s a good inlet, I like and do use them in front of isolation transformers for example. If you want some of that with the Extreme you could consider fitting a FI-50 NCF on your powercord which would be a less invasive procedure.
Wow, I have to say that is a staggeringly good and precise piece of advice. There’s obviously a ton of knowledge and no less amount of work gone into the Extreme. Its nice to see some of that knowledge every now and again in posts like these. Very nice answer Emile.
 

plasmod3

Well-Known Member
Aug 28, 2020
566
425
138
44
Thanks Emile, I am running Mark's Sablon King cord to the extreme where i did do an a/b to the fi50 - the former is definitely an outperformer ( kudos to mark) hence thinking of changing the receptacle. might order one in to give it a shot:) I ordered another 2 sabrent 8tb cards as well - will give you a shout once they are here - 40tb of storage - thats something to celebrate:D:D :)
 
  • Like
Reactions: Sablon Audio

Taiko Audio

Industry Expert
Feb 10, 2017
4,242
13,063
1,925
The Netherlands
taikoaudio.com
Thanks Emile, I am running Mark's Sablon King cord to the extreme where i did do an a/b to the fi50 - the former is definitely an outperformer ( kudos to mark) hence thinking of changing the receptacle. might order one in to give it a shot:) I ordered another 2 sabrent 8tb cards as well - will give you a shout once they are here - 40tb of storage - thats something to celebrate:D:D:)

It’s not a drop in replacement, the FI-09 is physically larger, the mounting holes do not align, and you’d need to replace the wiring to the fuse holder which will be too short. So this will require a bit of creative cutting, milling, drilling and (de)soldering! I should probably add this definitely voids warranty before this is interpreted as an endorsement ;)

40TB is awesome!
 

Sablon Audio

Industry Expert, VIP Donor
May 22, 2015
1,612
1,484
553
Whilst not Extreme specific, is probably worth mentioning that even the ostensibly regular sized Fi-06 NCF model isn’t actually regularly sized and requires something euphemistically called ‘mechanical modification’ to fit in normal chassis cutouts. For many people, that‘ll likely turn out to be a job one soon regrets starting...
 
  • Like
Reactions: Taiko Audio

Taiko Audio

Industry Expert
Feb 10, 2017
4,242
13,063
1,925
The Netherlands
taikoaudio.com
Wow, I have to say that is a staggeringly good and precise piece of advice. There’s obviously a ton of knowledge and no less amount of work gone into the Extreme. Its nice to see some of that knowledge every now and again in posts like these. Very nice answer Emile.

Thank you for your kind words. I can add a bit more detail as it seems to be appreciated. In the photos below you can see the IEC inlets we have evaluated. The Oyaide PP-inlet with a Palladium/Platinum plating (successor to the better known Oyaide R-inlet). The Rhodium plated Furutech FI-09 NCF which has been "modified" to drop into an existing standard IEC cut out, I've also attached a quick MS paint drawing of what you need to cut away to make it fit. And last but not least, the Bocchino Giotto G2 (silver plated).

Interestingly there's a quite pronounced difference in sound signature between these. The Bocchino is big and bold "sounding", on the warm side of neutral, in the Extreme it takes that aspect a bit too far netting out into an over bloated bass section and a slightly too laid back presentation, you can balance that out by playing with different wiring and you can also get it with Platinum plating which most likely changes that (did not try), but it does not fit physically as there's a big chunk of Panzerholz in the way, furthermore the availability is questionable and you can sometimes run into IEC plug compatibility issues. It does most definitely win the coolness award and generally speaking (ignoring voicing compatibility aspects) it's the best of the bunch. Bocchino makes an even larger IEC inlet called the "Mariner" which is huge at about 2x3x4" which accepts OOO gauge wiring! All custom order with very significant lead times. The Furutech FI-09 is the most forward / direct sounding inlet, I would recommend darker wiring to go with it as it can be a bit shouty and highlight sibilance, imho on the cold side of neutral. Something to keep in mind is I have observed changes in character at up to 6 months of use. The Oyaide PP I consider to be the most neutral inlet, it does not have that ultimate weight the Bocchino possesses, but it has a really good and even clarity and detail from the upper to the lowest octaves without an excess in "coldness". It is compatible with all music styles and it also does work well with all IEC powerplugs, I have not run into any offensive combinations with it, our pick for the Extreme.


11.JPG

12.JPG
 

spiritofmusic

Well-Known Member
Jun 13, 2013
14,609
5,415
1,278
E. England
Hmm, Bocchino certainly believes that "size matters".
 
  • Like
Reactions: oldmustang

plasmod3

Well-Known Member
Aug 28, 2020
566
425
138
44
Thank you for your kind words. I can add a bit more detail as it seems to be appreciated. In the photos below you can see the IEC inlets we have evaluated. The Oyaide PP-inlet with a Palladium/Platinum plating (successor to the better known Oyaide R-inlet). The Rhodium plated Furutech FI-09 NCF which has been "modified" to drop into an existing standard IEC cut out, I've also attached a quick MS paint drawing of what you need to cut away to make it fit. And last but not least, the Bocchino Giotto G2 (silver plated).

Interestingly there's a quite pronounced difference in sound signature between these. The Bocchino is big and bold "sounding", on the warm side of neutral, in the Extreme it takes that aspect a bit too far netting out into an over bloated bass section and a slightly too laid back presentation, you can balance that out by playing with different wiring and you can also get it with Platinum plating which most likely changes that (did not try), but it does not fit physically as there's a big chunk of Panzerholz in the way, furthermore the availability is questionable and you can sometimes run into IEC plug compatibility issues. It does most definitely win the coolness award and generally speaking (ignoring voicing compatibility aspects) it's the best of the bunch. Bocchino makes an even larger IEC inlet called the "Mariner" which is huge at about 2x3x4" which accepts OOO gauge wiring! All custom order with very significant lead times. The Furutech FI-09 is the most forward / direct sounding inlet, I would recommend darker wiring to go with it as it can be a bit shouty and highlight sibilance, imho on the cold side of neutral. Something to keep in mind is I have observed changes in character at up to 6 months of use. The Oyaide PP I consider to be the most neutral inlet, it does not have that ultimate weight the Bocchino possesses, but it has a really good and even clarity and detail from the upper to the lowest octaves without an excess in "coldness". It is compatible with all music styles and it also does work well with all IEC powerplugs, I have not run into any offensive combinations with it, our pick for the Extreme.


View attachment 70740

View attachment 70742
thanks Emile, there has been a lot of thought going into the extremes and good to know it has been optimised in everyway possible indeed:), so thhe extremes have an oyaide pp as the stock iec?
 

plasmod3

Well-Known Member
Aug 28, 2020
566
425
138
44
those bocchinos are crazy...very american where bigger is better - upsize me a plug lol! Having said that Carmine is australian though
 

Mr P

Well-Known Member
Apr 17, 2015
25
22
235
Fort Myers, Florida
I was planning on ordering an Extreme tomorrow until I saw the following in the online Extreme manual this morning;

“At a minimum it is suggested that the AC connection be capable of delivering 2 KW of continuous power without neither wiring or plugs and sockets getting warm.“

If I remember my basic electrical theory that comes out to a 16.7 amp draw at 120 volts. For those of you that have Extremes in the US are you using a dedicated 20 or 30 amp circuit to power your Extreme and/or system? Unfortunately adding a dedicated line may not be feasible in our home.
 

Taiko Audio

Industry Expert
Feb 10, 2017
4,242
13,063
1,925
The Netherlands
taikoaudio.com
Hello @Mr P ,

Good catch, we’ll rephrase that in the “advice for audiophile OCD” section of the manual. The Extreme draws around 60 watts or ~0.6A from a 110V line. That remark is just there to indicate an adequate powersupply can have a positive effect on ultimate sound quality.
 

ctydwn

Well-Known Member
Aug 23, 2019
345
1,350
208
Hi Mr P
My understanding from past correspondence with Emile is that the Extreme has short term 3A peaks during startup, after that it draws 500-600mA.
Thus, my experience has been it does not need its own dedicated outlet, but I believe @romaz (or @nenon) found it benefited from its own dedicated outlet.

Edit: I see now Emile already responded! Not surprisingly!
 
Last edited:
  • Like
Reactions: Taiko Audio

EuroDriver

Well-Known Member
Sep 16, 2015
926
2,479
450
Monaco
I would like to give Extreme Owners an update on the progress of TAS

Wilson has been beavering away with his program code and late on Saturday night he sent us the Extreme Direct player, XD for short. XD plays native PCM and DSD to ASIO USB DAC’s


I had it running last night on my lowly rig in the office, Emile had it running in Hengelo this afternoon.

Let me say we achieved the benchmarks and more. I am not going to comment on the SQ that we are hearing, we will leave that to the Alpha Testers.

In less than 2 weeks the Alpha will have landed
 

Attachments

  • image0.png
    image0.png
    2.4 MB · Views: 48
  • image1.png
    image1.png
    2.2 MB · Views: 45

wil

Well-Known Member
Jul 22, 2015
1,482
1,510
428
I just updated to “Build 667” and music is still sounding enchanting, engaging, (add other superlatives here). Has anyone else done this and what was your result?

667? Or do you mean 571 to 610?
 

About us

  • What’s Best Forum is THE forum for high end audio, product reviews, advice and sharing experiences on the best of everything else. This is THE place where audiophiles and audio companies discuss vintage, contemporary and new audio products, music servers, music streamers, computer audio, digital-to-analog converters, turntables, phono stages, cartridges, reel-to-reel tape machines, speakers, headphones and tube and solid-state amplification. Founded in 2010 What’s Best Forum invites intelligent and courteous people of all interests and backgrounds to describe and discuss the best of everything. From beginners to life-long hobbyists to industry professionals, we enjoy learning about new things and meeting new people, and participating in spirited debates.

Quick Navigation

User Menu

Steve Williams
Site Founder | Site Owner | Administrator
Ron Resnick
Site Co-Owner | Administrator
Julian (The Fixer)
Website Build | Marketing Managersing