I understand, thank you. But I don't want to glue something to the platter.
Mine came with an adhesive like double stick tape. Easy to attach and remove. Alcohol wipe and no residue. Gone with no trace.
I understand, thank you. But I don't want to glue something to the platter.
The RoadRunner is excellent and is easiest. It is no longer available.
The sensor needs to be placed underneath the platter. I used a small piece of wood to which I attached the sensor and I placed it behind the plinth with a small patch of blue tack between the piece of wood and the platform so the sensor would not move.
If I understand correctly you use a block of wood to raise the sensor above the plinth (1 24/32") so it reaches to within 1/8" of the magnet on the bottom of the platter?
Did you glue or double-stick tape the block of wood in place on the plinth? (I am afraid it will look DIY.)
View attachment 119369
Yes. The block of wood was not on the plinth but on the platform on which my Balance TT was residing. I used a very small patch of Blue Tack to make it stick to the platform. The magnet is delivered with a soft removable glue.
Steve Williams Site Founder | Site Owner | Administrator | Ron Resnick Site Co-Owner | Administrator | Julian (The Fixer) Website Build | Marketing Managersing |