4:3 OLED TVs: A Win For All,

ajant

Well-Known Member
Jan 14, 2017
36
2
138
Anyone owning or planning to own an OLED TV surely appreciates their uniquely stunning black level performance, a must for noir genre movie fans. On a related topic, perhaps 55% or more of your favorites were probably shot in 1.85:1 aspect, so the horizontal bars you see shouldn’t be too thick on your standard 16:9 OLED. Some recent movies and some old classics like “2001: A Space Odyssey”, “Sound of Music”, “Three Women”, “Ben Hur” and “Hud” were shot in 2.35: 1. Consequently, they will all have thicker horizontal bars. https://en.wikipedia.org/wiki/Aspect_ratio_(image)

Everyone hates bars but it’s much worse for many cinephiles like me who also enjoy movies released prior
to the mid-50s. Many of those, both “A” and “B” pictures, were filmed in 1.37:1 aspect, such as
https://www.imdb.com/title/tt0038559/technical?ref_=ttfc_sa_5
https://www.imdb.com/title/tt0042039/technical?ref_=ttfc_sa_5
https://www.imdb.com/title/tt0036775/technical?ref_=ttfc_sa_5
https://www.imdb.com/title/tt0038355/technical?ref_=ttfc_sa_5
https://www.imdb.com/title/tt0057207/technical?ref_=ttfc_sa_5
https://www.imdb.com/title/tt0048261/technical?ref_=ttfc_sa_5
https://www.imdb.com/title/tt0023245/technical?ref_=ttfc_sa_5
https://www.imdb.com/title/tt0044314/technical?ref_=ttfc_sa_5
https://www.imdb.com/title/tt0043131/technical?ref_=ttfc_sa_5
https://www.imdb.com/title/tt0041954/technical?ref_=ttfc_sa_5
https://www.imdb.com/title/tt0187684/technical?ref_=ttfc_sa_5
https://www.imdb.com/title/tt0034587/technical?ref_=ttfc_sa_5

Ditto for decades of vintage TV shows from the early 60s (Perry Mason) to the mid-90s (X-Files).

Try watching any of it even on a 77” OLED. If you’re like me the vertical bars, which will be even thicker than horizontal bars when viewing most widescreen aspect content, will be unbearable. And stretching Perry Mason or cropping Gilda’s (or Scully’s) matador hat is unthinkable. Consequently, many of us are compelled to watch this “pillarboxed” 4:3 content on CRT TVs. Picture quality is not too bad and CRTs have excellent OLED-like contrast ratio. But except for a 40” direct view CRT which Sony once released about 17” years ago, virtually all CRTs are a painfully small 32”, less than half the area of 65” widescreen TVs. And the best of performing CRTs (flat CR tube. component video inputs) are becoming impossible to find, and to get serviced. The same for refrigerator sized rear projection CRTs, which while some had 50” screens picture quality couldn’t match that of direct view CRTs. And though direct view projectors can deliver high contrast ratios and large 4:3 images many of the better models cost at least $5,000. and may present placement problems for some users.

The obvious solution here to persuade select TV brands to market a 4:3 OLED TV, size ~ 40” to 50”.

Unfortunately, as much of the CE industry is closely tied to Hollywood, it’s not surprising that cutthroat aspects of that business reflect indifference towards consumer opinions and expectations, at least among the major TV brands, all of whom no longer accept consumer feedback at their websites. Indeed, “apparent” demand might have grown substantially larger if cinephiles hadn’t given up in disgust with asking OLED brands to release 4:3 TVs. Again, except for perhaps Pioneer, most of the majors are deaf to consumer requests, save perhaps from what they glean from their own prognostications. And try finding their marketing VPs’ contact info to share new product ideas; good luck with that.


However, I am about to begin proposing this new product to several other approachable brands .

While demand for a 4:3 OLED may not be huge it is certainly vibrant and long lived. https://www.avsforum.com/forum/40-o...isplay-watching-old-tv-shows-stuff-4-3-a.html

Additionally, there still are communities at AVS and at other home theater forums devoted to long defunct direct view CRT TVs, of course which are almost exclusively 4;3. https://www.avsforum.com/forum/64-direct-view-single-tube-crt-displays/ And here only two months ago members are still calling to bring CRTs back into production, as they have for years. https://www.avsforum.com/forum/64-d...back-crt-tv-s-into-production-line-again.html

It’s also well known among videophiles that CRTs, plasmas and OLEDs share very similar performance levels-unmatched by any existing display technology. But as Anthony1 from the first AVS link above suggested, many CRT fans would instantly embrace a space saving flat panel 40” or larger 4:3 OLED TV.

A good sized 4:3 OLED is the way to go-and ideally with a processor at least nearly as good as Sony’s to upscale DVD and BD content.

Analog Video Connectivity: A Must for the 4:3 OLED

Whatever the reasons for the CE industry’s imposed Analog Sunset, it unfairly deprives cinephiles of enjoying their feature packed Denon, Marantz, Pioneer and other high end DVD players. Sony includes one (1) composite input, though most inconveniently placed on the side of their A9G OLED (presumably just for camcorder playbacks)-but which is unsightly and would require longer cable runs from the TV to the DVD player.

But all high end DVD players have component video outputs. And as that connection yields the highest quality analog signal it likely will make it easier for the OLED’s processor to upscale the DVD video signal.

Furthermore, virtually no currently produced BD players have zoom control-a highly prized viewing tool among cinephiles. I was badly upset that my otherwise excellent Oppo BDP-95 has only partial zoom control; it doesn’t allow you to reposition and center a desired part of the zoomed image on the screen.My new Pioneer UDP-LX500 BD player and the discontinued Arcam 411p are about the only BD players which can. But virtually all DVD players have this advanced zoom control functionality, like my trusty JVC XV-NA70BK.

Cinephiles have long been victimized by the Blu-Ray Assn for mandating Oracle’s BD-J disc authoring-which by default or deliberately locks out zoom and sometimes also slow motion features-and forces compliance upon BD player brands. But all DVDs are free of these oppressive restrictions that rob consumers of the freedom to enjoy as they please the products they purchase. Advanced zoom and slow motion controls are invaluable viewing tools allowing cinephiles more intimate viewing and appreciation of select scenes. https://forum.blu-ray.com/showthread.php?p=17681489#post17681489

Sadly, few if any DVD players have an HDMI output. Thus, all OLED TVs should include component video inputs-or at the very least a rear mounted composite and/or S-video input. Indeed, all OLED TV brands can be assured that adding this analog video connectivity to the proposed 4:3 OLED will further endear this long awaited niche product to the home theater enthusiast community

Pixel Count and DVD/BD Upscaling

All currently produced OLED TVs have 4K resolution; the pixel count being roughly four times that of the LCD or LED panels used to build earlier 1080p displays. So unless the 4:3 OLED TV has a high quality on board upscaling processor-like the one in Sony’s A9G OLED-the 1080p BD or 480i DVD content displayed on 4K OLED panels may likely fill only a small part of the screen. Alternately, it’s worth considering that while these processors generally do a good job, since most users would only be watching 4:3 content on a this 4:3 display, if it was instead a 1080 rather 4K OLED, BDs would be shown in their native 1080p scale; only DVDs would need to be upscaled. Of course, there currently are no consumer OLED brands making 4:3 OLEDs, nor are there any 1080 widescreen OLEDs.

Ultimately, only each TV brand would know how the economics of OLED panels with 1080 vs. 4K pixel counts would impact their own production of 4:3 OLED TVs. But if they stay with 4K pixels, Pioneer or those brands below should aim to design the 40” to 50” 4K 4:3 TV’s OLED TV around the best upscaling processor within the niche market price point, perhaps ~$2200. or so. The high quality upscaling of 1080p BDs and DVDs (source formats still probably most common among collectors of vintage movies and TV shows) will allow viewers to sit at a comfortable distance.
 

ajant

Well-Known Member
Jan 14, 2017
36
2
138
Subject: 4:3 OLED TVs: A Win For All, Part 2 of 2

Fortunately, as OLED technology has now matured the overall cost of making these TVs today has fallen substantially, thus volume sales risks versus tooling costs may be comfortably low-even when marketing
lower volume 4K 4:3 OLED TVs with advanced upscaling, the same full featured remotes found in popular
16:9 widescreen OLEDs-and the added component video inputs.

Regarding assembly parts, though LG is likely still the sole supplier of OLED panels this firm may be helpful in getting 4:3 TVs built as cheaply as possible. https://en.wikipedia.org/wiki/Universal_Display_Corporation

And there are now numerous OLED panel fabricators. Perhaps these and others are supplying the
Chinese OLED TV brands listed below-those which may already be selling OLED TVs in North America.
https://en.wikipedia.org/wiki/List_...anufacturers#List_of_OLED_panel_manufacturers https://www.oled-info.com/companies-list/oled-display-producers

Again, regarding demand, even if there are conservatively just ~ 10,000 members among the most prominent home theater forums expressing interest in owning 4:3 OLEDs, the number of consumers actually wanting one could be well beyond 10 to 50 times as much. Demand could easily be tested with runs of 7,000 units or so. And if Pioneer or Chinese brand OLEDs can perform nearly as good as Sony and LG models, and/or for a somewhat lower price, sales may grow even higher.

Finally, given the still extant global pandemic lockdown with so many people staying close to home, a 40”
or larger 4:3 OLED will make big chunks of one’s vintage personal movie and TV collection look their best.

I will first be approaching Pioneer, as I especially hope it will be they who agree to market this product.
Though no longer making TVs, their UDP-LX500, which I purchased last week, is arguably the best full featured BD player in its price class.
https://www.pioneerelectronics.com/PUSA/Home/Blu-ray-Disc/Elite-Blu-ray-Disc-Players/UDP-LX500

If Pioneer’s 4:3 OLEDs were to impress like their Kuro plasmas had for years they may literally corner the market. Depending on Pioneer’s interest will I decide on approaching several Chinese OLED TV brands which now or soon will be serving the US market. https://www.cnet.com/news/ces-2020-chinese-tv-giant-skyworth-goes-big-to-enter-us-market/

https://www.prnewswire.com/news-rel...o-the-united-states-and-canada-300974574.html

Huawai’s website shows numerous offices throughout the US. Some even post the contact info of their marketing directors at their websites. And unlike the majors, these newcomers welcome consumer feedback.
https://www.sharptvusa.com/contact/
http://www.konka.com.hk/Contact/
https://skyworthusa.com/contact/
https://e.huawei.com/us/how-to-buy/contact-us
https://www.hisense-usa.com/contact/
https://support.tclusa.com/contactus?contact_query=Please enter your question

https://www.pioneerelectronics.com/PUSA/AboutPioneer/Contact+Us
https://pioneerassets.com/contact
https://pioneerelectronics.com/PUSA...USA)+Inc.+Appoints+Naito+as+President+and+COO

Bottom Line: If you don’t ask you don’t get. So for those who have long awaited 4:3 OLEDs
please express your requests at the feedback/contact pages of the above brands’ websites.

But for the reasons given, please begin with Pioneer.

And please be sure to also your interest for 4:3 OLEDs-and what you’re doing to make them
happen-at bestbuy forum, tom’shardware.com, hometheaterforum.com, AVSforum.doc, CNET.com, AVforums.com, Blu-Rayforum.com, et al.

Please do it today!

DISCLAIMER: Though it would be nice to receive credit for helping to make 4:3 OLED TVs a reality,
I am in no way seeking any kind of monetary compensation, nor am I employed by the CE industry.
For me, it’s all about the joys of home theater.
 

MadFloyd

Member Sponsor
May 30, 2010
3,076
774
1,700
Mass
I think this is a crazy idea.. Get the largest screen you can and ignore the vertical black bars.

And if you can't, drape some black velvet on each side to mask them.
 
  • Like
Reactions: assessor43

ajant

Well-Known Member
Jan 14, 2017
36
2
138
I think this is a crazy idea.. Get the largest screen you can and ignore the vertical black bars. And if you can't, drape some black velvet on each side to mask them.

Your "sane" solution is a poor compromise in a number of ways for those who fully understand the problem. First, my brain somehow happens to find vertical pillar bars far more disturbing than horizontal bars. At worst, that makes me different, not crazy; and I'm not alone on that score either. Second, your black cloth solution really won’t suffice as the other problem with watching 4:3 images on a 16:9 display is that the vertical bars will be thicker than would be horizontal ones, at least for 1.85:1 images, so you lose more actual screen space.

As for being “picky”, how would your reaction be any different if there were no 16:9 displays and only 4:3 screens to watch one of your favorite 1.85:1 movies or post circa 1995 TV shows-or have even thicker horizontal bars when watching “Bad Day at Black Rock“, “2001” shot in 2.35:1, and in the wider aspects Hollywood now wants to pursue? In fact, if Hollywood has its way (and thanks to Sony and the rest of those CE thugs it usually does), 16:9 screens will be phased out sooner rather than later in favor of 21:9 screens, thereby making their newest titles appear more attractive due to smaller horizontal bars. This is already happening with smartphones.

Of course, that will mean our collections of 1.85:1 movies and TV shows will display with nice big fat horizontal bars. Won’t be so easy to drape black cloth over those bars. In any case, as it was with watching 4:3 images on 16:9 screens, you will lose lots of screen space watching 1.85:1 stuff on 21:9 screens.

Of course, I thought of a 4:3 projector and it’s not the worst though not an ideal alternative. Yes, ~52 to 60” 4:3 Da Lite or other brand screens are available; Da Lite will even custom cut one to size if needed, all for under $500. (non-motorized). List price on a very good Epson 4:3 projector ~ $3K. My small room will be kept quite dark allowing the projector to operate in eco mode, but even though this will minimize heat and fan noise and I would actually suspend the projector from a metal rack spanning the entire width of an empty closet, fan noise still may be too loud. And relative to my seating location the distortion from any required keystoning might be too noticeable.

Furthermore, few projectors are likely to yield contrast ratios and black levels equal to OLED TVs. And of course, you lose the convenience of having your BD player and amplifiers along or near the same wall as you can with an OLED TV.

Again, if you don’t ask you don’t get. So using the 4:3 display dimensions in this chart I will build a mock cardboard 4:3 display to set the distance vs. the approximately on-axis seated viewing height and use that size around a minimal range to pitch my idea to those OLED brands. https://en.wikipedia.org/wiki/Displ...n_handheld_devices,_computer_monitors_and_TVs

The answer will likely be no but I’d be upset with myself if I didn’t try.
 

BlueFox

Member Sponsor
Nov 8, 2013
1,709
406
405
I think this is a crazy idea.. Get the largest screen you can and ignore the vertical black bars.

And if you can't, drape some black velvet on each side to mask them.

I agree. I had to remove my initial thoughts to this thread. :)

When I watch movies on my 75” Sony Z9D I never notice the bars as I am watching the movie.
 

Mikem53

Well-Known Member
Oct 1, 2020
662
581
105
I think this is a crazy idea.. Get the largest screen you can and ignore the vertical black bars.

And if you can't, drape some black velvet on each side to mask them.
I have to agree, it gives it that theatre look.. I’ve grown accustomed to it.

@ajant Appreciate the write up and explanations, interesting material. Just don’t see the need to
fuss over it, from my perspective.
 

About us

  • What’s Best Forum is THE forum for high end audio, product reviews, advice and sharing experiences on the best of everything else. This is THE place where audiophiles and audio companies discuss vintage, contemporary and new audio products, music servers, music streamers, computer audio, digital-to-analog converters, turntables, phono stages, cartridges, reel-to-reel tape machines, speakers, headphones and tube and solid-state amplification. Founded in 2010 What’s Best Forum invites intelligent and courteous people of all interests and backgrounds to describe and discuss the best of everything. From beginners to life-long hobbyists to industry professionals, we enjoy learning about new things and meeting new people, and participating in spirited debates.

Quick Navigation

User Menu

Steve Williams
Site Founder | Site Owner | Administrator
Ron Resnick
Site Co-Owner | Administrator
Julian (The Fixer)
Website Build | Marketing Managersing