if you switch the foz 2 on it lights up like a Christmas tree, try it on the test lp and it does the same when changing track, i have tried to calibrate this using the tones off the web site through a mp3 player , but no matter what i try i just cannot get the led lights to stay off when no...
No it just done this one day , on switching it on by the remote, krell said it may be the cpu , i can get it to work so i can not see it being the cpu , , been told i need an original remote to put a code into the machine , which i dont have, as there seems to be different ones
honest in the uk it cost £450 , i might as well off purchased a bag of bolts, the FOZ 2 is a total wast of money i feel as though i have been ripped of , if it was calibrated in the factory like they say it was , why did they not seal the small trimmers with wax so they dont move, the foz one...
i have the foz V2 it is a pile of rubbish , impossible to calibrate , i ended up with the right channel lit up with out any signal going to it , even following the instructions and the new version still end up back at the same point , DONT BUY ONE , i have the original Fozgometer and have no...
after speaking to Raymond from Krell and being told they dont have any transformers to fit this 2250 and there was a way they can fix it at a hell off a cost , being told in an email HI end means HI Cost of repairs,i Talked to Absolute sounds , who said they know what the problem is but would...
i am going to take the transformer out this weekend , it is very heavy , i think it is about70% of the weight of the whole 30kg unit , the fix seems to be to drill a hole though the glue and then use a fixing kit , but and a big but you cannot see were the drill hole is going , Absolute...
talked to krell they changed the design of the transformers , as they can come loose , but also you cannot tighten them back up the nut is held captive in glue, all i can think of is that over time this bond breaks, causing the transformer to come loose, it is a very Bad design flaw, as the...
i just used a foz , i down loaded the test files and put them onto a mp3 /mp4 player , and used that to test it , i did use a burned test disk but kept getting different readings, as the mp3 /mp4 had the raw files it worked better , there mut be a fault in the burning software of the cd player...
the fozgometer is a good piece of equipment , how ever you will get different readings, form diffrent test lp, i have got the AP one the clear audio and the hifi news all give different depending on the way they were cut , as fozgometer reccomends the ap one that must be the one to use with...
i have used a fozgometer to set the azimuth on a benz micro m1 , it now sounds perfect , on a sme 309 i was able to adjust the cartridge by twisting the head shell until the fozgometer was reading equal for both sides , i did not bother with the vta , becuse of the differences in thickness of...
so i went the hole hog and had an acrylic platter made, which is not yet completed , it still has to have the weights inserted , i want it to look as if the platter has frozen the wights in the acrylic , but have no running groove, it is about 40mm thick , i have not picked it up as it is only...
i did say you would be infor a surprise, i know they surprised me in the making and development , although i dont make them ,i am always their to help ,when problems happen , which they do , The ideas that have been added to the kit have all come from users, all willing to help, all being happy...
Hi David i hope you have got used to them by now, and the problems caused by the poor acrylic spider that had not been machined properly for the orbe se, with one not being perpendicular to the fase of the spider and one being out of alignment , the problem seems that the spider was drilled...
Hello i do not do loan or try out sets as every set is made to fit the deck you own and cannot be used on another deck as michell never kept to one size hole in the chassis , it has caused a major problem , which is in the process of getting sorted out ,, all the chassis out there are...
hello well i am in the middle of doing the bases at this moment , and do not have any in ,, if you pm me i will let you know as soon as i do , i would need the sizes of the holes, regards pete