Custom Cables Fabricated by Triode Wire Labs!

[Triode Pete]

This time around a custom set of Y-splitters, RCA to two Female RCA connectors. This famous horn loudspeaker manufacturer wanted to test his new subwoofer system by splitting the RCA signal into his main loudspeakers and the new subwoofers.

Cheers,
Pete

 

[Triode Pete]

Another 1/4" Stereo Phone connector coupled to two Male RCA connectors.

This time it's 12 feet long and the 1/4" jack is a super high quality Furutech FP-704 (G).

Cheers,
Pete

 

[Triode Pete]

Can you say "Jumpers", Four times Four??? 16 TWL jumper wires!

This time for an audiophile with Volti Rival Type II loudspeakers with External Crossovers. The external crossover input terminations have 3 pairs of inputs (Low-Medium-High) and 3 pairs of outputs (Low-Medium-High) to the Rival Type II loudspeaker inputs.

The first photo shows TWL bi-wired speaker cables (Cardas CAB bananas) into the external crossover inputs with one set of TWL 6" jumpers (Cardas CGMS spades to Cardas CAB bananas)...

The second photo shows the THREE sets of TWL 18" jumpers (Cardas CAB bananas) from the external crossover to the loudspeaker input!

Holy Moly, that's a lotta jumpers!

Cheers,
Pete

 

[Triode Pete]

This time a pair of single-ended male RCA outputs to a set of dual male mono 1/4" ts cables.

 

[Triode Pete]

Here's a 1.5m pair of "Spirit II" interconnects, with a balanced female XLR connector at the origin and a male RCA connector at the destination end.

This was made for an audiophile in Australia.



Cheers,
Pete

 

[Triode Pete]

Here's a special TWL "Obsession NCF" power cord fitted with a Neutrik NAC3FC-HC powerCON 32 Amp Cable Connector.

This 7 ft. long "Obsession NCF" is going to an audiophile in Louisiana who just purchased a Synergistic Research Power Cell 8 SX power conditioner.

Cheers,
Pete

 

[Triode Pete]

This time, a custom-made HDMI - I2S cable following the PS Audio specification. This was for an audiophile connecting a PS Audio transport to a Holo Audio May DAC.

 

[Triode Pete]

For the holidays, a custom single stereo Spirit II XLR interconnect cable (male 4 pin to male 4 pin) for an audiophile in Indonesia...

This stereo interconnect will go between a Trafomatic Primavera SV 811 headphone amp into a Raal Requisite TI-1b Toroidal Transformer Ribbon Headphone Amplifier Interface.

Cheers,
Pete

 

[Triode Pete]

Happy holidays to all the TWL family!

Thank you, Scott! Happy Holidays to you as well!

Blessings,
Pete