What ethernet cables are members using?

With respect to optical fiber implementations, I've been doing this for a while now, and have found every "control factor" with respect to fiber can and does, have an influence on the audio quality. This includes but is not restricted to:
1) The fiber media convertors (FMCs). The better (audio grade) ones, e.g. those used in Sonore OpticalRendus, Uptone EtherREGEN (ER), SOtM products, Lumin, etc, sound better than the el-cheapo, IT- industry grade ones (e.g. TP-Link, etc)
2) The optical transceivers. In my experience, single-mode (e.g, Planet Tech) sound better than generic multi-mode (e.g. TP-link)
3) The optical fiber: For single-mode fiber, I've found that Corning ClearCurve single mode sounds best. For Multi-mode: Tripp-Lite.
4) The power supplies for the FMCs: generic SMPS sound the the worst, LPS sound the best, including those from Sonore, AfterDark, SOtM, etc.
5) Word/Master Clocks for the Ethernet switches or FMCs that have SFP cages. AfterDark makes a nice range of affordable Master Clocks for products e.g. EtherREGEN and SOtM (ER also has a clock input).
6) Clock cables for the Master Clocks for FMCs: better clock cables also improve audio quality.
7) Power distribution for the power supplies for these devices. Audio quality power distributors bring notable improvements.
8) Ground-plane noise reduction: reducing and/or removing ground-plane noise from these devices can provide notable improvment in audio quality. For example, simply connecting a ground cable from EtherREGEN's ground terminal to a Shunyata power distributor GP-NR terminal, Altaira ground hub or Gemini ground hub can provide a notable improvement in audio quality, even "downstream" for components in the main audio rack.

Could you elaborate on how you came to these conclusions? DBT? No measurements it seems?

Please don’t take this question as criticism, just trying to wade through all theories and statements about networks and music streaming from different sources.
 
Yes, you may be right. Certainly about the Cisco, at least. I thought, though, that 10G modules were supposed to be ‘1G compatible’?
Not all SFP+ are dual mode. Also, if you use a 10G SFP+ in a 10G switch, it will output 10G, which cannot be decoded by a downstream SFP/FMC.

Some managed 10G switches allow you to set output to 1G when using a dual rate SFP+, some won't.
 
By listening...
Crazy that someone looking to improve their listening enjoyment would actually let their ears decide.

(Yes, that was sarcasm)
 
  • Like
Reactions: NaimYourTubes
I have 4 Ethernet cables in my system and the best one i have is the Vertere Pulse-HB, the other 3 are Pink Faun Interlink which are also very good but warmer.
 
Always again astonishing to see how much of a difference there is between Ethernet cables. Having tried a number of known cables over the years I ended up using the Audioquest Diamond which was performing nicely. That changed when I tried the Network Acoustics Muon Pro that made another reasonable improvement.
 
Always again astonishing to see how much of a difference there is between Ethernet cables. Having tried a number of known cables over the years I ended up using the Audioquest Diamond which was performing nicely. That changed when I tried the Network Acoustics Muon Pro that made another reasonable improvement.
That's because Ethernet and USB cables are susceptible to a number of noise factors that discernibly impact audio quality, including low- and high-source leakage impedance current (which results in threshold jitter, which is different from deterministic jitter) and common-mode noise. Also, the longitudinal* EM wave that propagates along the cable is also a noise factor.

* – The transverse EM wave that also propagates on the digital cable is the EM wave that actually carries the signal. The signal Is NOT a stream of 0's and 1's, it is an analog "square wave" voltage.
 
Last edited:
  • Like
Reactions: jasond
Ediscreation Reference Silver cable, anyone tested?
I have. They are my choice between Extreme Fiberbox II and Extreme Silent Switch and between switch and Aurender N30SA.
 
  • Like
Reactions: keithc

About us

  • What’s Best Forum is THE forum for high end audio, product reviews, advice and sharing experiences on the best of everything else. This is THE place where audiophiles and audio companies discuss vintage, contemporary and new audio products, music servers, music streamers, computer audio, digital-to-analog converters, turntables, phono stages, cartridges, reel-to-reel tape machines, speakers, headphones and tube and solid-state amplification. Founded in 2010 What’s Best Forum invites intelligent and courteous people of all interests and backgrounds to describe and discuss the best of everything. From beginners to life-long hobbyists to industry professionals, we enjoy learning about new things and meeting new people, and participating in spirited debates.

Quick Navigation

User Menu