My personal journey to MY SONIC LAB

In Germany it should sell for 14000 EUR, stand from August.

1,4 (some says 1,6) Ohm impedance
0,5mV output at 5cm/sec and 1kHz

Sign. Gold 7750,- EUR
Sign. Platinum 9500,- EUR
 
Last edited:
  • Like
Reactions: SOS
In Germania dovrebbe essere venduto a 14.000 euro, prezzo da agosto.

Impedenza 1,6 Ohm
Uscita 0,5mV a ???

Segno. Oro 7750,- EUR
Segno. Platino 9500,- EUR
Lucky in Germany on average 20% less than in Italy.... then if someone asks why we buy abroad I start But they give us the specifications of MSL
» Testina a bobina mobile con impedenza ultra bassa
» Risposta in frequenza: 10 Hz - 50 kHz
» Tensione d'uscita: 0,5 mV
» Impedenza: 1,4 ohm (DCR)
» Magnete: Neodimio #50
» Pressione dello stilo: 1,9 - 2,2 g
» Bilanciamento di canale: entro 0,5 dB (1 kHz)
» Diafonia: entro 30 dB (1kHz)
» Pin: placcati in rodio
» Peso: circa 13 g
the new MSLlistino_mysoniclab.jpg
 
  • Like
Reactions: SOS
But not the right specifications

The Diamond has surely no boron cantilever.

And what is correct, 1,4 (mostly stated) or 1,6 ohm for the Diamond?
 
Last edited:
  • Like
Reactions: Massimo66
I had the chance to listen to the MSL Diamond on my system yesterday. It is a Platinum Signature on steroids : more of everything. It was difficult to go back to the Platinum Signature.

View attachment 136334

We compared it against some other top contenders among others the Phasemation PP5000 and the Etsuro Gold


View attachment 136336
I like your cartridge storage case. Is that something commercial or homemade?
 
I thought I would jump into this msl thread rather than start a fresh one.

I'm shopping for a tonearm to go with my msl eminent ex and high mass tt. I'm just in initial shopping stages. Budget maybe around 2500 +/- (probably used).

Just wondering if anyone had any suggestions on arms, brands or specs they think works well with msl in general or my car in particular...
 
MS Signature Platinum works well with Acoustic Signature TA 2000 NEO

My Sonoc TA 2000 NEO.jpg
My Sonic Lab P S.jpg
 
I thought I would jump into this msl thread rather than start a fresh one.

I'm shopping for a tonearm to go with my msl eminent ex and high mass tt. I'm just in initial shopping stages. Budget maybe around 2500 +/- (probably used).

Just wondering if anyone had any suggestions on arms, brands or specs they think works well with msl in general or my car in particular...
My MSL Eminent EX works great with my Kuzma 4Point 11" and XL DC TT (high mass) connected to my CH P1 with X1.
 
From my own experience the MS Signature Platinum works WONDERFUL on the CS Port Linear Arm AFU1-2. On my Kuzma Safir it was just OK. Waiting to receive the new MSL Sig Diamond and take it for a spin on both arms.
 
From my own experience the MS Signature Platinum works WONDERFUL on the CS Port Linear Arm AFU1-2. On my Kuzma Safir it was just OK. Waiting to receive the new MSL Sig Diamond and take it for a spin on both arms.
Super nice arm. I'm unlikely to find one in my price constraints but it's going on the list to hunt for.
 
Hello all,
Since AC-6 has been discussed here, maybe someone can help me. I'm planning to upgrade both my turntable and cartridge. Planning to get Accuphase AC-6 and mount it on Pro-Ject Classic Reference turntable. Would those two be a good match? The turntable choice is due to XLR connections and decent looks.

Big thanks!
 
Hello @El Puerco Volante have never heard myself the Accuphase AC-06 cartridge but at the US price of $6,975 don't think I'd be putting it on a 6K table. Maybe an MSL Eminent EX or one of the SoundSmith cartridges. But hopefully others can chime in if they have heard the combo.
Good luck in your quest and HAPPY HOLIDAYS
 
Hello @El Puerco Volante have never heard myself the Accuphase AC-06 cartridge but at the US price of $6,975 don't think I'd be putting it on a 6K table. Maybe an MSL Eminent EX or one of the SoundSmith cartridges. But hopefully others can chime in if they have heard the combo.
Good luck in your quest and HAPPY HOLIDAYS
Thanks, same for you :) That's the best turntable I found with XLR connection, except a 50k machine, but that's a tad too much. If anyone knows a better one for a half-reasonable price - happy to hear a suggestion. And of course very much looking forward to someone who knows the products I'm after. Really not sure if those are a good match but don't have a way to listen upfront.
 

About us

  • What’s Best Forum is THE forum for high end audio, product reviews, advice and sharing experiences on the best of everything else. This is THE place where audiophiles and audio companies discuss vintage, contemporary and new audio products, music servers, music streamers, computer audio, digital-to-analog converters, turntables, phono stages, cartridges, reel-to-reel tape machines, speakers, headphones and tube and solid-state amplification. Founded in 2010 What’s Best Forum invites intelligent and courteous people of all interests and backgrounds to describe and discuss the best of everything. From beginners to life-long hobbyists to industry professionals, we enjoy learning about new things and meeting new people, and participating in spirited debates.

Quick Navigation

User Menu