What turntables do you use? Pictures would be nice as well :-)

[groovemaster]

Actually, not much needs to be said about the Thorens TD 124.
The reasonableness of a relaunch can also be discussed. The new Thorens TD 124 DD shows a, in my opinion, very successful example of a modern revival. An AS community member has fulfilled his dream and placed this modern Thorens TD 124 DD with AS Phonolab next to the Garrard 401. His profession as a writer brings it with him to go on an exciting journey through time with vinyl as well.


groovemaster

 

[mhconley]

Opera Consonance LP-2.0, Mørch UP-4 and a Grado Sonata 2:


Martin

 

[groovemaster]

Not everyone can say that they own a moated castle. One community member is in the fortunate situation of having his music room in a moated castle.

At the weekends, he can withdraw from everyday business and listen to his jazz records under the protection of the historic walls. Very important for an owner of a consulting agency to clear his head.

On the left a Scheu turntable in black/chrome with Sorane tonearm. A combination that fits perfectly.

On the right is the AS Phonolab with RECOMPIZER from Audiospecials.de. Also Made in Germany. On the right, with a silver front, an AIRTIGHT Masterpiece amplifier amplifies the vinyl messages to the speakers.
groovemaster

 

[tom539]

Hello folks,

registerd for a while, it is time to start with my first post here in what´s best - with my two turntables:



Bauer DPS3iT with vdH Colibri XGP - my reference.



Micro Seiki DDX1500 with two arms - to play...
- FR64s cooper + SPU Classic GME II
- Sorane TA-1 with different cartridges: Benz Ruby Z with Yamamoto HS-4, AS Fidelis, Jico Seto Hori

atb, Tom

 

[gleeds]

Wave Kinetics NVS with Durand Tosca and Goldenberg Maestro cartridge.

As a second and somewhat less expensive offering, the Ars Macinae M1 will arrive in June.

I love Ricard's Teres "woody" and the Sansui tuner too!

 

[tony22]

I mentioned this in another thread, but well, here it is.




The production VPI Avenger Direct, serial #0001. The second pic shows the motor controls, but was taken before it was all put together.

 

[wbass]

I mentioned this in another thread, but well, here it is.

View attachment 90228
View attachment 90229

The production VPI Avenger Direct, serial #0001. The second pic shows the motor controls, but was taken before it was all put together.

Very cool. Not that we know yet, but north of $20k?

 

[gajgmusic]

Hello folks,

registerd for a while, it is time to start with my first post here in what´s best - with my two turntables:

View attachment 89814

Bauer DPS3iT with vdH Colibri XGP - my reference.

View attachment 89813

Micro Seiki DDX1500 with two arms - to play...
- FR64s cooper + SPU Classic GME II
- Sorane TA-1 with different cartridges: Benz Ruby Z with Yamamoto HS-4, AS Fidelis, Jico Seto Hori

atb, Tom

I love my Bauer table. I did have challenges with isolation but have solved it with Symposium. Great set ups.

 

[dcc]

The two old sisters are finally reunited. Both have been fully ovehauled and upgraded by Jaap Pees from Hanze Hifi.

 

[slim9]

Oracle Delphi Mark lll Graham 1.8t Koetsu Rosewood Signature w/Origin Live power supply.

 

[slim9]

Here's pics

 

[djsina2]

CSPort TAT2M2…

 

[Kcin]

Added the FR66s w/Koetsu Jade Platinum

 

[strappoacustico]

Ciao a tutti!.. in foto il mio giradischi attuale. Vyger indian Signature IV Generation
Buona Musica!

 

[shakti]

one more classic arrived @home

Basis Audio Debut Gold Standard

still looking for a nice black / gold Tonearm. Must fit into the 214mm drilled base.

 

[Rekmeyata]

I thought I would post my just so this site would have some trailer trash components instead of all of those $10,000 plus turntables, my Rotel RP1000 cost $20 then later added a $75 Empire 400tc cart that an old stereo store had a NOS collecting dust so he gave me a deal, that really improved the sound and opened up the soundstage from the old ADC cart; then a bit later after that I upgraded the mat to a Hudson HiFi yellow acrylic mat which made a big sound improvement as well from the rubber mat, I had also had a cork mat but it didn't sound near as good as the acrylic mat and only a tad better than the rubber one; I then added isolation feet. The below one is not mine, but it's exactly like what mine looked like when I bought it; I remove the dust lid when I play my records so that the lid doesn't amplify vibration into the turntable. My next project for it this summer is to dampen vibration more by making a: DIY turntable isolation base with Ikea Aptitlig, that is on YouTube and he shows step by step how to make it.

​

Ok, now you guys can stop laughing and go back to showing your uber expensive turntables!

 

[christensenleif@msn.com]

one more classic arrived @home

Basis Audio Debut Gold Standard

still looking for a nice black / gold Tonearm. Must fit into the 214mm drilled base.


View attachment 91108

View attachment 91110View attachment 91113View attachment 91114

should have kept your Airtangent Ref imo

 

[strappoacustico]

A better photo....

 

[Salectric]

A better photo....

View attachment 91298

Wow! What a monster table. I love it!

 

[strappoacustico]

Thank you Salectric for your comment!