Thanks guys... I look to this as a new beginning. Starting fresh with a clean slate and now will be getting help from the designer and the speaker manufacturer.
Hello, this is my noob attempt at a post, I recently built Ethan style panel traps one 1/4" and one 1/8" in each corner and a 6 x 7 cloud in my 11X16 bedroom (project studio) and took some measurements using Fuzzmeasure. This graph shows the left Focal CMS 50 speaker only (6" woofer), no sub. I tried moving the speaker around quite a bit, but still have null issues.
The mic was placed at ear level pointing straight up about a foot back from my current listening position which is 38% back in the room. That's where the null seemed to be its least awful. The room has an arch about 2/3 of the way back that opens into a area that has a much higher ceiling. It was at one time an outdoor space, that has been roofed over. It sounds real nice in here, but then I'm not sure what to expect. I can say it sounds worlds better than the last room I had. The arch makes putting superchunks in difficult. The room also has the dreaded door in the corner also making super chunks next to impossible. I was thinking of adding some membrane type traps, but I'm not sure how to make them yet.
Bruce, did you give her a kiss afterwards? :b
Pardon me if this has already been discussed: Bruce, have you considered removing the top pair of subs and placing them independently, along the lines of what Amir has tested?
Thanks so much for the feedback guys. Very helpful.
John, I will set all controls back to default and just do positioning first. Then I will do an overlay of before and after. I think that will help determine what changes were made.
I will show only 20 - 200Hz with no smoothing with limits suggested.
Frantz.. I'm not totally against DRC. I'd rather try EQ in the analog domain first.
Appreciate all that are following along.
Steve Williams Site Founder | Site Owner | Administrator | Ron Resnick Site Co-Owner | Administrator | Julian (The Fixer) Website Build | Marketing Managersing |