Indeed, I am the first time to install Graham arm.
Dear Christian
Normally I used Walter E. Schoen alignment template for cartridge & arm installation for my previous arms; Roksan & Nottingham's arm.
That's why I am looking for the spec of Graham.
It seems there is some kind of white plastic cap for spindle for installation. Unfortunately my purchased one without this tool.
I will be sincerely appreciate if can provide me the easier solution or spec for my arm.
By the way, my turntable is Nottingham Interpsace HD (surely I am also looking for suitable table for upgrade), Phantom II (SME mounting bottom)
Tommy
Short of contacting Graham Engineering for this info you could contact the distributor,
Musical Surroungs:http://www.musicalsurroundings.com/contact.html
They can get you the spindle cup so you can get the right pivot to spindle distance. You may also want the cart alignment jig to install your cart off table (easier) They may also have the mounting specs as they have to use them for different mounting boards on turntables.
From the manual: Phantom B-44 Specs
Effective Length (Standard model) 235mm
(Long version) 247mm
Offset Angle (Standard) 23.431 degrees
(Long) 22.230 degrees
Overhang (Standard) 17.6mm
(Long) 16.7mm
Tonearm Weight: 1100 grams
Cart Weight Range: 5-19 grams
That's it for the specs. When my girlfriend get's back, I can scan the entire manual into pdf format and email it to you if you like. Just PM me your email address.
Best Regards,
Chris