I've decided to turn the room around 180 degrees again (the way it was built to be). Then, set up everything to sound (and measure) the best that it can be before implementing the subs and crossover. Once that is done, JL Audio will come here and give it the final thumbs up!
Because the freq. response of the f112 goes much higher (21 - 119 Hz (±1.5dB) as opposed to the f113 (20 - 86 Hz (±1.5dB), and JL had suggested a crossover point much higher (~85-90Hz) than what you and the rest use. Guess we'll see if that works! Remember, my speakers are MUCH less efficient than yours!
Thanks guys. I know this will be a long process. Plan to start next week after I get back from Mesa, AZ. Turning the room around will take about 2-3 days!
Because the freq. response of the f112 goes much higher (21 - 119 Hz (±1.5dB) as opposed to the f113 (20 - 86 Hz (±1.5dB), and JL had suggested a crossover point much higher (~85-90Hz) than what you and the rest use. Guess we'll see if that works!
It arrived before the subs. It was intended to be used with Martin Logan Descent i's. Unfortunately the RCA connectors of the CR-1 are very close to each other and I could not use them with my RCA cables and cj equipment. I will probably try it in a fully balanced system.
ha-HAHHHH! You just answered one of my other questions to you in another thread about whether you were going to re-investigate sub-integration!!!!! Enjoy! Get it right...i have no doubt you will...and i cannot imagine you will ever go back. Magnificent.