Zero Distortion: Altec Assault and the Magic of Misho (Audio Antiquary)
- Thread starter bonzo75
- Start date
Nothing really to share- compared to what some here are doing. I am just finishing a project I had on the 'slow burner' where I made a cab for the RCF cx15n351 coax with a design Bill Woods did for me ten years ago ( small footprint, quasi blh/reflex).
The cabinets are ugly as I am not a carpenter and this was my first project- but I learned quite a bit.
While I get my head around this current speaker I will assemble material for a three way horn setup next. My current thought is nothing pushing the envelope ( multi-cell mid horn for 2" driver, maybe with used EV dh1a if I find them, or one of the new midrange drivers from B&C or Faital not sure), 1" on top tbd but I hear good things about the Faital hf108, and FLH mid-bass. The mid-bass cab is where I am least settled. I do not intend to use Radian Beryllium or higher drivers...that would be stage 3 after learning more.
@christensenleif@msn.com your system is an inspiration
The cabinets are ugly as I am not a carpenter and this was my first project- but I learned quite a bit.
While I get my head around this current speaker I will assemble material for a three way horn setup next. My current thought is nothing pushing the envelope ( multi-cell mid horn for 2" driver, maybe with used EV dh1a if I find them, or one of the new midrange drivers from B&C or Faital not sure), 1" on top tbd but I hear good things about the Faital hf108, and FLH mid-bass. The mid-bass cab is where I am least settled. I do not intend to use Radian Beryllium or higher drivers...that would be stage 3 after learning more.
@christensenleif@msn.com your system is an inspiration
If I may, I had followed Bonzo’s conviction and had Altec 817 built by PBN Audio, the rest of the speaker pretty much is an exact copy of Misho’s. All GPA drivers.
Initially I’ve used it with the Misho designed passive x-over, and now am trying Pass Labs active x-over and bi-amplification.
Overall the sound is miles ahead of my previous Avantgarde Duo Omega G2/ Lamm system.
In the last few days I’ve been glued to my chair. Everything sounds exceptionally engaging to me.
And that’s all that matters.
I couldn’t have cared less if Altecs are technically compromised, I’m sure they are. But that is of no consequence to me.
Initially I’ve used it with the Misho designed passive x-over, and now am trying Pass Labs active x-over and bi-amplification.
Overall the sound is miles ahead of my previous Avantgarde Duo Omega G2/ Lamm system.
In the last few days I’ve been glued to my chair. Everything sounds exceptionally engaging to me.
And that’s all that matters.
I couldn’t have cared less if Altecs are technically compromised, I’m sure they are. But that is of no consequence to me.
Attachments
Good points and sure many people love them, my post was a bit overly simplisitic, yet many who are actually desiging horns do not.
The variation I was targeting was if they are bass reflex and front horn loaded versus designs with a larger front horn load and some version of open rear wave. As far as I can tell several of your examples are the latter and hence are typically bigger- a big reason the VOTT cab has seen so much home use is its reasonable size with some LF extension. So when i asked I was referring specifically the Altec style flh+reflex not all flh. In some ways I answered my own question ( vott type is pretty small given efficiency and LF cutoff ) although you have prolific designers like Fitmaurice and others claiming to do everything a VOTT can do with smaller cabs. Just got me thinking.
Can you tell I'm planning a project
The Altec VOTT allows for lower extension in a 2-way. 2-way has advantages. The rear open ones will require some more space at the back, and all are even larger. But for me, key is to only replicate what plans are available for, and have heard them in person, where the person who designed a good specimen can help. DIY is rife with awful sounding speakers which happens when people try to design their own rocket to compete with Bezos.
That said, basing judgements on videos alone, I think some of the videos of that WAF system I linked above sound the best I have heard along with this, so why change? I don't know their exact plans though, the below is a DIY altec field coil with Garrard, SPU, WE 91b DIY amp.
I am originally from the Philadelphia area and my family is still there. I hope to make it back there next year and would love to hear your system.
Last edited:
I may have said this some pages back. I heard Howard Swanes big Altec with the 15 cell Chela multicell. It is shocking in how you are right there. It just envelopes you. Its an amazing sound. I do wonder if I would want to live with it every day. As I think about my new room, I wonder if I want to take those off Howards hands. But I can only assume the room would optimally need to be larger than the one I was thinking of to hold my PAP Trio 15. The speakers are big. But they look good. Like furniture.
Last edited:
The 9462 'ubangi' bass cab certainly is a large rendition of the flh+br topology. Sorry I have not heard it yet. So get it!!!
Hi is using all original Altec drivers. Dual 515b woofers per channel.
Crossing over at 850 to two 288H per channel. This is in original altec metal horn with 18 cells
Crossing over at 5500 to Altec 902
Crossing over at 9000 to Jensen 302
All passive crossover
Additionally he has another speaker you see in front which has WE 4151 woofer, with Altec 288H, and interesting above that JBL 375 beryllium instead of the 902, rest is same
Last edited:
Yes sure. It is unique but not unheard of to use two midrange drivers. No, no pictures
Just a heads up that I have a pair of Transition Audio upgraded Altec 1570b amps in the classifieds here, in case anyone wants/needs that kind of big bottle tube power for a FLH project
I am considering a OB FLH with 4 pc 515 16G (I have 4 extra 515s) and placing my CH1505 in center. The baffle is app 7 ft high and 4+ ft wide.
here is a pic of the baffle FLH in mind. And a picture of my system today
here is a pic of the baffle FLH in mind. And a picture of my system today
I would like just a little more low frequency by using all my 515s(4 a side instead of 2)… and secondly my wife doesn’t like the look of the “warship“ finish on the 817 cabinets.
The open baffle ones, from Bert in Netherlands, had less midbass whoomp. I am not sure if it was because the OB was losing bass at the back, or because he uses these DIY SS amps. Also, don't think he was using altecs then.
The vents of your current Altec should give enough lower bass with 515 if done right and more than OB. If you desire lower you will need subs is my guess.
Just to confirm, when you say lower bass are you referring to below 30 Hz, or are you just in general referring to the feeling of weight? The 817 cabinet you have should have very good weight